- Contact Person : Ms. Wong Queenie
- Company Name : Guangdong Benbon Electrical Co., Ltd.
- Tel : 86-757-25337033
- Fax : 86-757-25532603
- Address : Guangdong,Shunde,Xinbu Ind. Est., Leliu, Shunde, Foshan
- Country/Region : China
- Zip : 528322
Electromagnetic Induction Street lamp
Electromagnetic induction lamp is a light source that combining the principle of electric-magnetic induction and gas discharging. Since there’s no electrode and filament inside the lamp, another name of this lamp is called”Electrode-less” lamp. The life time of Electromagnetic induction lamp can be up to 100,000hours, which is 100 times of incandescet lamp, 5-15 times of HID(high intensity discharge) lamp and 5-10 times of CFL(compact fluorescent lamp). The working principle of Electromagnetic Induction Lamp is:
1. It will transfer the supplied energy into the lamp by coupling the induction from an Acelectric-magnetic field, and then create an electron avalanche of the inner filling gas to make it into plasma status.
2. When the excited atoms under plasma status return to the ground state, it will emit UV radiation at 253.7nm.
3. The phosphor on the inner side of the bulb wall will get excited by this UV radiation at 253.7nm, and then create visible light.
* Energy saving more than 75% * Ultra-long life no replacement needed, save material and labor * Environment friendly, using solid amalgam non-mercury pollution, meets the requirement of environmental protection * Good color rendering, close to sunlight and protect the eyes * No flash, no glare, protect the eyes not to be tired * High power factor, few energy loss * The life will not be affected even if switch no/off frequently. The light output will not decline as the fluorescent lamp during life time. * Good electrical specifications, use the IC chip design, high power facto, low current harmonics, steady current supplying, steady output of luminous flux. * Instant start without preheating. Prevent from the illumination interrupt by the reason of power cut, it can quickly start, be suitable for the emergency lighting without preheating * The electromagnetic interference(EMC) conforms to the national standard
Electromagnetic Induction Street lamp